Blog

Get the rule behind the gear you buy

• How to Become a HAZWOPER Trainer at Your Company

  How to become a HAZWOPER trainer: what 1910.120(e)(5) requires, how long a 40 hour train the trainer course takes, what it costs, and what it does not authorize.

• How to Become a Forklift Trainer at Your Company

  How to become a forklift trainer at your company: what OSHA 1910.178(l) requires, whether forklift trainers need certification, how long it takes, and the cost.

• NCCER Rigger Certification Levels: Rigger vs. Advanced Rigger

  NCCER rigger certification levels explained: Rigger vs. Advanced Rigger, the written assessment and practical exam, the 12-month window, and five-year renewal.

• Who Can Be a Scaffold Competent Person?

  Who can be a scaffold competent person under OSHA 1926.451: the definition, who designates them, what they inspect each shift, and who trains scaffold workers.

• Choose a Forklift Training Course That Meets 1910.178

  A forklift training course review that shows what online lessons can teach, what OSHA requires on the floor, and how to choose training that holds up.

• Calculate Fall Clearance for a Self-Retracting Lifeline Before You Tie Off

  How to work out the fall clearance a self-retracting lifeline needs, using the OSHA 1910.140 and 1926.502 limits and the manufacturer clearance chart.

• Test a Permit Space in the Order OSHA 1910.146 Requires

  The OSHA 1910.146 testing order for permit spaces: oxygen, then combustible gases and vapors, then toxics, with the hazardous atmosphere limits.

• Select the Right Arc Flash PPE Category Based on Your NFPA 70E Assessment

  How the NFPA 70E arc flash risk assessment sets the PPE category or incident energy, what the equipment label tells you, and how to match a kit to it.

• Meet the OSHA 1910.106(d)(3) Requirements for a Flammable Storage Cabinet

  What OSHA 1910.106(d)(3) requires of a flammable liquid storage cabinet: capacity, the 10-minute fire test, labeling, and metal or wood construction.

• Size Drum Spill Containment to 40 CFR 264.175 and the SPCC Rule

  How to size secondary containment for drums under 40 CFR 264.175 and the SPCC rule in 40 CFR 112, with worked examples for one, four, and ten drums.

• Set Up a Workplace AED Program That Reaches a Victim in Minutes

  Workplace AED program basics: what OSHA says, where to place the device, who to train, and how to keep it ready, with sources.

• Inspect a Safety Harness Before Every Use and Catch Damage Early

  A step-by-step pre-use harness inspection: webbing, stitching, hardware, labels, and fit, with what OSHA requires and what to do when a harness fails.

• Stop a Fall With the Right Control Before Work at Height Starts

  Fall protection that works: when OSHA requires it, guardrails versus personal fall arrest, clearance, inspection, rescue, and training.

• Know When Fall Protection Is Required at Six Feet

  When OSHA requires fall protection at 6 feet in construction, the 4-foot general industry trigger, common exceptions, and what a complete system needs.

• Remove a Personal Lockout Lock Only by the Written Procedure

  Who can remove a personal lock under OSHA 1910.147(e)(3), what the employer procedure for an absent worker must include, and the common mistakes.

• Verify an Online OSHA 10 Course Before You Pay

  When an online OSHA 10 course is legitimate, what the Outreach card proves, how to spot a card mill, and what employer training still has to cover.

• Make OSHA Training Change How Work Gets Done

  OSHA training should change how work gets done. Learn what it covers, what cards do not prove, and what employers must teach on the job before a shift.

• OSHA Awareness Versus Qualification Training

  OSHA awareness versus qualification training are not interchangeable. Learn what a card proves, what employers must teach, and who can do the job safely.

• Authorized Versus Affected Employees at Work

  Learn the real difference between authorized versus affected employees under OSHA lockout/tagout rules, and what each worker must do before service starts.

• How to Isolate Machine Energy Before Repairs

  Learn how to isolate machine energy before servicing: identify every source, lock and tag it, release stored energy, and verify zero energy before work.

• How to Conduct a Forklift Precheck Before Shift

  Learn how to conduct forklift precheck inspections that catch leaks, brake faults, and damaged forks before a truck goes to work on your shift safely.

• Separate Pedestrians From Forklifts in the Warehouse

  Warehouse pedestrian safety depends on separating people and forklifts, controlling blind corners, and stopping rushed shortcuts before someone gets hit.

• Keep Ladders Away From Power Lines

  Can ladders touch power lines? Treat every overhead line as energized. Learn clearance rules, material limits, and what workers must do before climbing.

• Forklift Refresher Training Requirements Explained

  Forklift refresher training requirements explained: when OSHA requires retraining, what evaluation must cover, and how supervisors document it correctly.

• OSHA 10 Versus OSHA 30: Which Course Fits?

  Compare OSHA 10 versus OSHA 30 by job role, course length, card limits, and the training employers still must provide for real jobsite hazards every day.

• Does Forklift Certification Expire? OSHA Rules

  Does forklift certification expire? OSHA requires an operator evaluation every three years and refresher training after unsafe operation or job changes.

• Forklift Operator Employer Evaluation That Counts

  Forklift operator employer evaluation is the jobsite check that proves a worker can run your truck safely in your actual workplace, not just pass a quiz.

• OSHA Focus Four Hazards: What Gets Workers Hurt

  OSHA Focus Four hazards - falls, struck-by, caught-in/between, and electrocution - demand controls that work before workers start the task on every job.

• Is OSHA 10 a License? What the Card Really Means

  Is OSHA 10 a license? Learn what an OSHA Outreach card proves, what it does not prove, and what employers must still train, assess, and control on site.

• OSHA 10 Construction vs General Industry

  Compare OSHA 10 construction vs general industry training, learn which course fits your work, and understand what an outreach card does not fully prove.

• Construction Guardrail Requirements That Stop Falls

  Construction guardrail requirements explained in plain English: where rails are required, how they must be built, and what workers inspect before work.

• Keep Three Points of Contact on Every Ladder Climb

  Three point contact ladder safety keeps hands free, feet secure, and workers off the injury list. Learn when the rule applies and what comes first on site.

• Ladder Extension Above Landing and the 3-Foot Rule

  Learn the ladder extension above landing rule: why 3 feet matters, how to secure access, and when a ladder is the wrong tool for the job on every shift.

• Ladder 4 to 1 Rule for Safe Setup Before Climbing

  Use the ladder 4 to 1 rule to set extension and straight ladders at a safe angle, secure the base, and avoid preventable falls at work on every shift.

• Temporary Removal of Lockout Tagout Rules

  Temporary removal of lockout tagout is allowed only under a controlled, documented process. Know who can remove devices and when work may restart safely.

• When Is Lockout Tagout Required During Maintenance?

  Know when is lockout tagout required, what counts as servicing, and how to control hazardous energy before a machine injures someone on a rushed shift.

• Prevent Ladder Falls With the Right Ladder, Setup, and Climb

  Practical ladder safety for workers: choose the right ladder, inspect it, set the angle, and stop shortcuts before a fall at work. For workers on ladders!

• Lockout Tagout: The Machine Is Not Safe Yet

  Lockout tagout protects workers during machine service. Learn isolation, verification, and training steps that prevent a sudden startup on the jobsite.